Why we rent our
equipment:
Some homeowners may
wish to take on their
projects themselves.
Many contractors rent
our equipment to
complete our task.
You can rent our
equipment with or
without an operator.
Whatcom Waterfront
Construction offers the
following items for rent to
qualified individuals or
firms:
Hercules EM- 60 vibratory driver /
extractor. Max. Centrifugal Force
60 ton
Collins 150lbs pneumatic hammer
( 1 kps ).
Collins 800lbs pneumatic hammer
( 2.5 kps ).
18 ton Bucyrus Erie C/SP 320
rough terrain crane with a 60 foot
boom.
Motorized sectional barge ( two 10
x 20 sections with spuds and one
6x8 diesel "pusher" with nav
lights as well as flood lights. ) All
sections are truckable. Recent
loads included a 228Kolbelco and
8 tons of super sacked rock.
Estimated payload on that trip was
80lbs with deck equipment.
A truckable 12 x 27 foot landing
craft with a 6 foot gate. Cargo
area is 6 x 24. Raised wheel
house with 2 bunks. Shallow draft,
unladen between 0 inches at bow
and 16 inches at stern
Shallow draft 9.5 x 40 steel river
tug ( TAKU ). Single screw with a 6
/ 71. Major over haul to drive shaft,
prop, new rail bulwark, bottom
paint and hull paint. We are done
and she is strong gain.
8 x 21 steel mini tug ( log bronc ).
Single screw with a 4 / 71.
Currently at Seaview for
maintenance and minor upgrades
25 ton Hyundai " hi walker "
excavator with thumb and bucket.
2 ton mini skid steer with
attachments
General equipment and tools:
small or medium welder, stick
welding, MIG and tig guns.
Generators, air compressors,
pneumatic tools for use in and
over the water.
Hand tools, socket wrenches,
grinders, power saws and table
saws to name a few.
Hydraulic pumps for running the
underwater chainsaw to cut off
those underwater piles.
Small hand cranes for lifting
beams setting anchors.
Mini barge that can hold up to
30,000 lbs.
The landing craft that can bring
out all things required for building
docks, floats, mooring anchors,
small skid steer loaders, tractors
and backhoes etc to you site that
either has no access or the site
that these things cannot be easily
moved from where the truck
delivers.
Oxy acetylene torches, plasma
cutters and pipe cutters that cut
an bevel the piles to make your
welding less complicated.
equipment:
Some homeowners may
wish to take on their
projects themselves.
Many contractors rent
our equipment to
complete our task.
You can rent our
equipment with or
without an operator.
Whatcom Waterfront
Construction offers the
following items for rent to
qualified individuals or
firms:
Hercules EM- 60 vibratory driver /
extractor. Max. Centrifugal Force
60 ton
Collins 150lbs pneumatic hammer
( 1 kps ).
Collins 800lbs pneumatic hammer
( 2.5 kps ).
18 ton Bucyrus Erie C/SP 320
rough terrain crane with a 60 foot
boom.
Motorized sectional barge ( two 10
x 20 sections with spuds and one
6x8 diesel "pusher" with nav
lights as well as flood lights. ) All
sections are truckable. Recent
loads included a 228Kolbelco and
8 tons of super sacked rock.
Estimated payload on that trip was
80lbs with deck equipment.
A truckable 12 x 27 foot landing
craft with a 6 foot gate. Cargo
area is 6 x 24. Raised wheel
house with 2 bunks. Shallow draft,
unladen between 0 inches at bow
and 16 inches at stern
Shallow draft 9.5 x 40 steel river
tug ( TAKU ). Single screw with a 6
/ 71. Major over haul to drive shaft,
prop, new rail bulwark, bottom
paint and hull paint. We are done
and she is strong gain.
8 x 21 steel mini tug ( log bronc ).
Single screw with a 4 / 71.
Currently at Seaview for
maintenance and minor upgrades
25 ton Hyundai " hi walker "
excavator with thumb and bucket.
2 ton mini skid steer with
attachments
General equipment and tools:
small or medium welder, stick
welding, MIG and tig guns.
Generators, air compressors,
pneumatic tools for use in and
over the water.
Hand tools, socket wrenches,
grinders, power saws and table
saws to name a few.
Hydraulic pumps for running the
underwater chainsaw to cut off
those underwater piles.
Small hand cranes for lifting
beams setting anchors.
Mini barge that can hold up to
30,000 lbs.
The landing craft that can bring
out all things required for building
docks, floats, mooring anchors,
small skid steer loaders, tractors
and backhoes etc to you site that
either has no access or the site
that these things cannot be easily
moved from where the truck
delivers.
Oxy acetylene torches, plasma
cutters and pipe cutters that cut
an bevel the piles to make your
welding less complicated.
 | |  | |  | |  | |  | |  | |  | |  | |  |
| Lake Whatcom just outside of Bellingham, WA. We build docks and much more! 3609275070 info@dillercorp.com |